The Fluidmesh®1100 is a quadri-band wireless Ethernet product designed and manufactured specifically for backhaul applications.
Quadri-band Radio operating at 2.4 GHz, 4.9 GHz, and 5.1-5.8 GHz
The Fluidmesh 1100 features one quadri-band radio and can operate at 2.4 GHz, 4.9 GHz, and 5.1-5.8 GHz and modulate up to 108 Mbps. The preferred frequency can be easily selected through a web based interface.
Optimized PRODIGY Transmission Protocol for maximum Reliability The Fluidmesh 1100 employs PRODIGY, Fluidmesh's proprietary high performance ‘intelligent’ transmission protocol, built to overcome the limits of standard license-free protocols and to deliver a wireless infrastructure with a higher level of reliability. Prodigy was developed to transmit any IP-compatible traffic including data, video, and voice. At the base of our innovative transmission protocol, there is a traffic optimization algorithm that allows every Fluidmesh device to assign a specific level of priority and reliability to every packet transmitted. This process allows the wireless network to automatically adjust its transmission parameters based on the type of traffic transmitted. The overall result is a better, more reliable, multi-service wireless infrastructure.
Compact Design for Easy Installation
The Fluidmesh 1100 is a compact unit designed for low visual impact deployments. The integrated panel antenna makes for easy installation and supports a range of up to 6 miles in line of sight. The provided low-power POE injector guarantees a straight-forward set-up.
The Fluidmesh 1100 is based on the innovative FluidThrottle™ technology which allows the user to limit the total cost of ownership of the wireless network by paying only for the amount of bandwidth required. Additional throughput can be easily achieved by upgrading the system with software plug-ins in case the bandwidth requirements increase over time. This solution makes Fluidmesh the most cost-effective and flexible wireless solution provider in the market.
The Fluidmesh 1100 supports the patent-pending FluidMAX™ technology and can be used to create Point-to-Point, Point-to-Multipoint, and Mesh architectures .Thanks to FluidMAX™, the Fluidmesh 1100 can operate with a centralized medium access control protocol, or with a distributed medium access control protocol, depending on the network layout. That means that our units can operate in either CSMA or TDMA. The decision is made automatically by the network based on its layout and requires no user intervention.
EasyMesh™ Platform and FMQuadro Interface
The Fluidmesh 1100 includes the EasyMesh™ platform. The EasyMesh technology allows the user to set the same range of private IP addresses across the entire network.
The Fluidmesh 1100 also includes the FMQuadro™ web interface which allows the user to configure, monitor, and troubleshoot the wireless network in real time without the need of additional software or a server.The unit comes with a built-in spectrum analyzer, a real-time bandwidth monitoring tool, and a wizard to facilitate the configuration of the system.
AES-128 Encryption Support (FIPS-197 Compliant)
The Fluidmesh 1100 includes support for 128 bit AES Encryption at the link-level which can be used for FIPS-197 compliance. Because AES is implemented in hardware, there is no loss in terms of performance when AES is enabled.
Simple Network Management Protocol (SNMP) Support
The Fluidmesh 1100 supports SNMP version 3. The Simple Network Management Protocol allows the user to centrally manage the mesh devices with a SNMP server and to receive automatic alarms in case of network failure.